The requested page could not be found.

               
Are you looking for:
Magnum RT Bumpers - Front - 4Runner
  • High clearance design for better approach angle and strong steel construction for ultimate front end protection
  • 1/8in Steel plate shell with 1/4in steel plate support braces give exceptional rigidity and strength. 3 stage powder coating process for a tough and durable textured finish to withstand any environment
  • Allows installation of a 30in single row LED light bar, the removable RT bar also has additional mounting slots on the underside of the bar. Integrated winch plate allows mounting of up to a 12k winch and synthetic rope fairlead
  • Cutting of the factory bumper fascia required to mount the Magnum bumper, bolts on to frame using factory mounting locations for a solid, durable installation. Weight - without RT bar installed: 65lbs; with RT bar installed: 75lbs
  • Backed by a Limited Lifetime manufacturer’s warranty on workmanship and structure, 1 year warranty on components and 1 year warranty on finish

Magnum RT Series Front Bumper for the Toyota 4Runner is built for the serious off-road enthusiast. The bumper was designed and built to give a greater approach angle, higher clearance of obstacles and front-end protection. Thick 1/8in steel plate construction with 1/4in support braces give exceptional strength to power through any terrain. Allows mounting of a 30-inch single row light bar in the middle opening with included brackets. Included RT bar has additional mounting points on the bottom and is removable giving you the option of installing the bar or leaving it off if your 4Runner is equipped with Adaptive Cruise Control Sensor. Integrated winch plate allows installation of up to a 12k winch and mounts for a synthetic rope fairlead and fully welded solid D-Ring mounts to pull yourself out of any situation. Tough 3 stage powder coating process with a textured finish give ultimate corrosion resistance for a lifetime of service and rugged looks. Cutting of the factory bumper fascia required to mount the Magnum bumper, bolts on to frame using factory mounting locations for a solid, durable installation. Give your vehicle stylish good looks with the rugged design of the Magnum RT Series Toyota 4Runner front bumper. Backed by a Limited Lifetime manufacturer’s warranty on workmanship and structure, 1 year warranty on components and 1 year warranty on finish.

Motor Oil and Lubricant Bottle Rack

Motor Oil and Lubricant Bottle Rack Accessory for Magnum Chase Tire Rack

Track Bar Relocation Bracket - Rear
  • For Wrangler JL and JLU models with 2.5-4.5 inch suspension lift
  • Allows custom lateral alignment along the rear axle
  • Corrects roll center and restores factory handling to extend the life of tires, shocks, and bushings
  • Multiple mounting locations for custom lateral alignment of OE track bar, includes all necessary mounting hardware
  • Black powder coated bracket and zinc plated hardware for protection from corrosion and debris

The RSO Suspension Rear Track Bar Axle Bracket for your lifted Wrangler JL 2 door or JLU 4 door corrects the roll center, restores the factory handling, and reduces the body roll. Multiple mounting locations allow customizable lateral alignment of your factory rear track bar correcting suspension geometry on all JL and JLU models with a 2.5 to 4.5 inch lift. This bracket eliminates the need for a custom aftermarket adjustable track bar.

Beast Forged Adjustable Track Bars
  • Fully adaptable using fine adjustment threads enable precise positioning of axle housing
  • Black powder coated finish on zinc plated forged steel is up to 230 percent stronger than factory track bars
  • Variable length helps to properly align axle housing with chassis, corrects suspension and steering geometry
  • Direct fit using OE bends for proper clearance for a no hassle install using factory style premium rubber bushings provide long service life, quiet operation, and firm steering feel
  • Limited lifetime manufacturer warranty on workmanship/structure, 5 years on the components, and 1 year on the finish/coating

The Raptor Series Beast Forged Adjustable Track Bars are an absolute MUST if you have or are planning a lift. Fine adjustment threads make these track bars adaptable for precise axle positioning. The OE factory track bar’s nonadjustable rigid nature makes it vulnerable to create alignment problems, and improper suspension and sway bar connection operation. The Raptor Series Forged Beast track bar is over 230% stronger than the OE factory track bar. Constructed using forged steel, premium rubber bushings and OE bends for a hassle-free install and long service life of quiet operation. Finished in a black powder coat for ultimate corrosion resistance and a limited lifetime manufacturer warranty on workmanship/structure, 5 years on the components, and 1 year on the finish/coating.

Magnum RT Bumpers - Front - Tacoma
  • High clearance design for better approach angle and strong steel construction for ultimate front end protection
  • 1/8in Steel plate shell with 1/4in steel plate support braces give exceptional rigidity and strength. 3 stage powder coating process for a tough and durable textured finish to withstand any environment
  • Allows installation of a 20in dual row LED light bar, the removable RT bar also has additional mounting slots on the underside of the bar. Integrated winch plate allows mounting a 10k winch and synthetic rope fairlead
  • Cutting of the factory bumper fascia required to mount the Magnum bumper, bolts on to frame using factory mounting locations for a solid, durable installation. Weight - without RT bar installed: 58lbs; with RT bar installed: 66lbs
  • Backed by a Limited Lifetime manufacturer’s warranty on workmanship and structure, 1 year warranty on components and 1 year warranty on finish

Magnum RT Series Front Bumper for the Toyota Tacoma is built for the serious off-road enthusiast. The bumper was designed and built to give a greater approach angle, higher clearance of obstacles and front-end protection. Thick 1/8in steel plate construction with 1/4in support braces give exceptional strength to power through any terrain. Allows mounting of a 20-inch dual row light bar in the middle opening with included brackets. Included RT bar has additional mounting points on the bottom and is removable giving you the option of installing the bar or leaving it off. Integrated winch plate allows installation of a 10k winch and mounts for a synthetic rope fairlead and fully welded solid D-Ring mounts to pull yourself out of any situation. Tough 3 stage powder coating process with a textured finish give ultimate corrosion resistance for a lifetime of service and rugged looks. Cutting of the factory bumper fascia required to mount the Magnum bumper, bolts on to frame using factory mounting locations for a solid, durable installation. Give your vehicle stylish good looks with the rugged design of the Magnum RT Series Toyota Tacoma front bumper. Backed by a Limited Lifetime manufacturer’s warranty on workmanship and structure, 1 year warranty on components and 1 year warranty on finish.